NDS
[Ports]

Functions
void	rt_hw_cpu_reset ()
void	rt_hw_cpu_shutdown ()
void	rt_hw_interrupt_init ()
void	rt_hw_interrupt_mask (int vector)
void	rt_hw_interrupt_umask (int vector)
void	rt_hw_interrupt_install (int vector, rt_isr_handler_t new_handler, rt_isr_handler_t *old_handler)
rt_uint8_t *	rt_hw_stack_init (void *tentry, void *parameter, rt_uint8_t *stack_addr, void *texit)
void	rt_hw_show_register (struct rt_hw_register *regs)
void	rt_hw_trap_udef (struct rt_hw_register *regs)
void	rt_hw_trap_swi (struct rt_hw_register *regs)
void	rt_hw_trap_pabt (struct rt_hw_register *regs)
void	rt_hw_trap_dabt (struct rt_hw_register *regs)
void	rt_hw_trap_resv (struct rt_hw_register *regs)
void	rt_console_puts (const char *str)

---

Detailed Description

Main processor: ARM946E-S at 67MHz Cache: 8 KB Instruction Cache, 4KB Data Cache TCM: 8KB Instruction, 4KB Data

Co-processor: ARM7TDMI at 33MHz

---

Function Documentation

void rt_console_puts

(

const char *

str

)

This function is used to display a string on console, normally, it's invoked by rt_kprintf

Parameters:

str

the displayed string

This function is used to display a string on console, normally, it's invoked by rt_kprintf

Parameters:

str

the displayed string

void rt_hw_cpu_reset

(

void

)

this function will reset CPU

void rt_hw_cpu_shutdown

(

void

)

this function will shutdown CPU

void rt_hw_interrupt_init

(

void

)

This function will initialize hardware interrupt

void rt_hw_interrupt_install	(	int	vector,
		rt_isr_handler_t	new_handler,
		rt_isr_handler_t *	old_handler
	)

This function will install a interrupt service routine to a interrupt.

Parameters:

	vector	the interrupt number
	new_handler	the interrupt service routine to be installed
	old_handler	the old interrupt service routine

void rt_hw_interrupt_mask

(

int

vector

)

This function will mask a interrupt.

Parameters:

vector

the interrupt number

void rt_hw_interrupt_umask

(

int

vector

)

This function will un-mask a interrupt.

Parameters:

vector

the interrupt number

void rt_hw_show_register

(

struct rt_hw_register *

regs

)

this function will show registers of CPU

Parameters:

regs

the registers point

rt_uint8_t* rt_hw_stack_init	(	void *	tentry,
		void *	parameter,
		rt_uint8_t *	stack_addr,
		void *	texit
	)

This function will initialize thread stack

Parameters:

	tentry	the entry of thread
	parameter	the parameter of entry
	stack_addr	the beginning stack address
	texit	the function will be called when thread exit

Returns:

stack address

void rt_hw_trap_dabt

(

struct rt_hw_register *

regs

)

An abort indicates that the current memory access cannot be completed, which occurs during a data access.

Parameters:

regs

system registers

Note:

never invoke this function in application

void rt_hw_trap_pabt

(

struct rt_hw_register *

regs

)

An abort indicates that the current memory access cannot be completed, which occurs during an instruction prefetch.

Parameters:

regs

system registers

Note:

never invoke this function in application

void rt_hw_trap_resv

(

struct rt_hw_register *

regs

)

Normally, system will never reach here

Parameters:

regs

system registers

Note:

never invoke this function in application

void rt_hw_trap_swi

(

struct rt_hw_register *

regs

)

The software interrupt instruction (SWI) is used for entering Supervisor mode, usually to request a particular supervisor function.

Parameters:

regs

system registers

Note:

never invoke this function in application

void rt_hw_trap_udef

(

struct rt_hw_register *

regs

)

When ARM7TDMI comes across an instruction which it cannot handle, it takes the undefined instruction trap.

Parameters:

regs

system registers

Note:

never invoke this function in application